Specifications | S12704 | S12708 | S12710 | S12712 |
Switching Capacity | 4.88/16.08 Tbit/s | 12.32/32.16 Tbit/s | 13.12/38.56 Tbit/s | 17.44/44.96 Tbit/s |
Packet Forwarding Rate | 3,120/4,560 Mpps | 6,240/9,120 Mpps | 7,440/11,040 Mpps | 9,120/12,960 Mpps |
MPU Slots | 2 | 2 | 2 | 2 |
SFU Slots | 2 | 4 |
4 (integrated and independent) |
4 |
Service Card Slots | 4 | 8 | 10 | 12 |
CSS2 |
1+N MPU backup in a cluster Up to 1.92 Tbit/s cluster bandwidth, 4 μs inter-chassis transmission latency |
|||
Wireless Network Management |
Native AC AP access control, AP region management, and AP profile management Radio profile management, unified static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management |
|||
User Management |
Unified user management 802.1x, MAC, and Portal authentication Charging based on traffic volume and online duration User authorization based on user groups, domains, and time ranges |
|||
iPCA |
Adds marks on service packets in order to measure the number of lost packets and packet loss ratios in real time with zero payload Measures the number of lost packets and packet loss ratios at the network and device levels on Layer 2 and Layer 3 networks |
|||
SVF2.0 |
Up to 4K clients (access switches and APs) virtualized into a single device 2-level AS structure Unified management on Huawei and non-Huawei devices |
|||
Interoperability |
VLAN-based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST) Link-type Negotiation Protocol (LNP) (similar to DTP) VLAN Central Management Protocol (VCMP) (similar to VTP) |
1. Two MPUs |
2. Twelve of the following service cards can be installed:
NOTE:
The cards supported by a switch depend on the software version. For details, see Version Requirements for Components. |
3. Four SFUs |
4. A pair of mounting brackets
NOTE:
The mounting brackets are used to secure the chassis in a cabinet. |
5. Six power modules | 6. Two CMUs |
7. Front ESD jack
NOTE:
The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
8. Cable management frames
NOTE:
The cable management frames separate cables on different cards and help route cables orderly. |
1. Five Fan Module |
2. Rear ESD jack
NOTE:
The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
3. JG ground terminal
NOTE:
The two-hole OT terminal of a ground cable can be connected to the screws to ground the chassis. |
4. A pair of handles
NOTE:
The handles are only used for this purpose: After you lift the chassis onto the guide rails or tray, grasp the handles to drag the chassis into the cabinet. |
5. Air filter
NOTE:
The air filter prevents dust from entering the chassis. |
- | - | - |
Card Type |
Card Name |
Card Description |
Card Series |
Supported Version |
Maximum Power Consumption |
Weight |
Part Number |
||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Main control unit |
ET1D2MPUA000 |
S12704/S12708/S12712 Main Processing Unit A (optional clock) |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: not supported |
100 W |
2.88 kg (6.35 lb) |
03030RPE |
||||||||||||||||||||
Main control unit |
ET1D2MPUBC00 |
S12710 Main Processing Unit B (optional clock) |
- |
S12704, S12708 and S12712 chassis: not supported S12710 chassis: supported in V200R010C00 and later versions |
214.9 W |
3.65 kg (8.05 lb) |
03031YLQ | ||||||||||||||||||||
Main control unit |
ET1D2MPUBC01 |
S12710 Main Processing Unit B (Support Secure Boot) |
- |
S12704, S12708 and S12712 chassis: not supported S12710 chassis: supported in V200R012C00 and later versions |
214.9 W |
3.65 kg (8.05 lb) |
03032TXR | ||||||||||||||||||||
SFU |
ET1D2SFUA000 |
S12704/S12708/S12712 Switch Fabric Unit A |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: not supported |
83 W |
3.32 kg (7.32 lb) |
03030RPF |
||||||||||||||||||||
SFU |
ET1D2SFUC000 |
S12704/S12708 Switch Fabric Unit C |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 chassis: supported in V200R005C00 and later versions S12710 and S12712 chassis: not supported |
350 W |
3.96 kg (8.73 lb) |
03030TDC |
||||||||||||||||||||
SFU |
ET1D2SFUD000 |
S12708/S12712 Switch Fabric Unit D |
- |
S12704 and S12710 chassis: not supported S12708 and S12712 chassis: supported in V200R005C00 and later versions |
350 W |
3.96 kg (8.73 lb) |
03030RPG |
||||||||||||||||||||
SFU |
ET1D2SFUB000 |
S12700 Switch Fabric Unit B |
- |
Supported in V200R010C00 and later versions |
186.3 W |
3.25 kg (7.17 lb) |
03031YLR | ||||||||||||||||||||
Subcard on the main control unit |
LE0D00CKMA00 |
Clock pinch board-1588 |
- |
Supported in V200R010C00 and later versions |
6 W |
0.10 kg (0.22 lb) |
03020PPT |
||||||||||||||||||||
Subcard on the SFU |
EH1D2VS08000 |
8-port 10G Cluster Switching System Service Unit (SFP+) |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: not supported |
30 W |
0.50 kg (1.10 lb) |
03021UWH |
||||||||||||||||||||
Subcard on the SFU |
ET1D2VQ06000 |
6-Port 40GE Cluster Switching System Service Unit (QSFP+) |
- |
S12704, S12708 and S12712 chassis: supported in V200R012C00 and later versions S12710 chassis: not supported |
31.85 W |
1.0 kg (2.2 lb) |
03032JWW |
||||||||||||||||||||
Monitoring unit |
EH1D200CMU00 |
Centralized Monitoring Unit |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
1 W |
0.22 kg (0.48 lb) |
03030NWB | ||||||||||||||||||||
OSP |
EH1D2PS00P00 |
Open Service Platform Unit |
- |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions (except in V200R007C20) S12710 chassis: supported in V200R010C00 and later versions |
137.5 W |
5.50 kg (12.13 lb) |
03021PHK |
||||||||||||||||||||
ET1D2G24SEC0 |
24-port 100/1000BASE-X interface card (EC, SFP)-128K MAC |
EC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
63 W |
2.66 kg (5.86 lb) |
03030SGL |
|||||||||||||||||||||
1000M interface card |
ET1D2T36SEA0 |
12-port 100/1000BASE-X and 36-port 10/100/1000BASE-T interface card (EA, RJ45/SFP)-32K MAC |
EA |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
62 W |
2.50 kg (5.51 lb) |
03030SGX | ||||||||||||||||||||
1000M interface card |
ET1D2G48TEA0 |
48-port 10/100/1000BASE-T interface card (EA, RJ45)-32K MAC |
EA |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
62 W |
2.50 kg (5.51 lb) |
03030SGN | ||||||||||||||||||||
1000M interface card |
ET1D2G48TEC0 |
48-port 10/100/1000BASE-T interface card (EC, RJ45)-128K MAC |
EC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
68 W |
2.66 kg (5.86 lb) |
03030SGP | ||||||||||||||||||||
1000M interface card |
ET1D2G48TX1E |
48-port 10/100/1000BASE-T interface card (X1E, RJ45) |
X1E |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
120 W |
2.92 kg (6.44 lb) |
03030SGE | ||||||||||||||||||||
1000M interface card |
ET1D2G48SEA0 |
48-port 100/1000BASE-X interface card (EA, SFP)-32K MAC |
EA |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
75 W |
2.54 kg (5.60 lb) |
03030SGH | ||||||||||||||||||||
1000M interface card |
ET1D2G48SEC0 |
48-port 100/1000BASE-X interface card (EC, SFP)-128K MAC |
EC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
92 W |
2.66 kg (5.86 lb) |
03030SGJ | ||||||||||||||||||||
1000M interface card |
ET1D2G48SX1E |
48-port 100/1000BASE-X interface card (X1E, SFP) |
X1E |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
140 W |
3.04 kg (6.70 lb) |
03030SGD | ||||||||||||||||||||
ET1D2S04SX1E |
4-port 10GBASE-X and 24-port 100/1000BASE-X and 8-port 10/100/1000BASE-T combo interface card (X1E, RJ45/SFP/SFP+) |
X1E |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
130 W |
2.88 kg (6.35 lb) |
03030SGF | |||||||||||||||||||||
GE/10GE interface card |
ET1D2S08SX1E |
8-port 10GBASE-X and 8-port 100/1000BASE-X and 8-port 10/100/1000BASE-T combo interface card (X1E, RJ45/SFP/SFP+) |
X1E |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
130 W |
2.84 kg (6.26 lb) |
03030SGG | ||||||||||||||||||||
GE/10GE interface card |
ET1D2S24SX2E |
24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card (X2E, SFP+) |
X2E |
Supported in V200R010C00 and later versions |
201.8 W |
3.3 kg (7.28 lb) |
03031YGJ | ||||||||||||||||||||
GE/10GE interface card |
ET1D2S24SX2S |
24-Port 10GE SFP+ Interface and 8-Port GE SFP Interface Card (X2S, SFP+) |
X2S |
Supported in V200R010C00 and later versions |
192.3 W |
3.2 kg (7.05 lb) |
03031YGG | ||||||||||||||||||||
GE/10GE interface card |
ET1D2S16SX2E |
16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card (X2E, SFP+) |
X2E |
Supported in V200R010C00 and later versions |
192.4 W |
3.3 kg (7.28 lb) |
03031YGL | ||||||||||||||||||||
GE/10GE interface card |
ET1D2S16SX2S |
16-Port 10GE SFP+ Interface and 16-Port GE SFP Interface Card (X2S, SFP+) |
X2S |
Supported in V200R010C00 and later versions |
182.4 W |
3.2 kg (7.05 lb) |
03031YGK | ||||||||||||||||||||
ET1D2X04XEA0 |
4-port 10GBASE-X interface card (EA, XFP)-32K MAC |
EA |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
64 W |
2.16 kg (4.76 lb) |
03030SGR | |||||||||||||||||||||
10GE interface card |
ET1D2X04XEC1 |
4-port 10GBASE-X interface card (EC, XFP)-128K MAC |
EC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
75 W |
2.28 kg (5.02 lb) |
03030SGS | ||||||||||||||||||||
10GE interface card |
ET1D2X12SSA0 |
12-port 10GBASE-X interface card (SA, SFP+)-32K MAC |
SA |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
85 W |
2.30 kg (5.07 lb) |
03030SGY | ||||||||||||||||||||
10GE interface card |
ET1D2X16SSC0 |
16-port 10GBASE-X interface card (SC, SFP+)-128K MAC |
SC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
150 W |
2.60 kg (5.73 lb) |
03030SHB | ||||||||||||||||||||
10GE interface card |
ET1D2X16SSC2 |
16-port 10GBASE-X interface card (SC, SFP+)-128K MAC |
SC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R008C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
131 W |
2.80 kg (6.17 lb) |
03031HGN | ||||||||||||||||||||
10GE interface card |
ET1D2X32SSC0 |
32-port 10GBASE-X interface card (SC, SFP+)-128K MAC |
SC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R008C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
207 W |
3.02 kg (6.66 lb) |
03031FSM | ||||||||||||||||||||
10GE interface card |
ET1D2X32SX2E |
32-Port 10GBASE-X Interface Card (X2E, SFP+) |
X2E |
Supported in V200R010C00 and later versions |
213.7 W |
3.3 kg (7.28 lb) |
03031WHS | ||||||||||||||||||||
10GE interface card |
ET1D2X32SX2S |
32-Port 10GBASE-X Interface Card (X2S, SFP+) |
X2S |
Supported in V200R010C00 and later versions |
203.3 W |
3.2 kg (7.05 lb) |
03031YGE | ||||||||||||||||||||
10GE interface card |
ET1D2X32SX2H |
32-Port 10GBASE-X Interface Card (X2H, SFP+) |
X2H |
Supported in V200R010C00 and later versions |
214.9 W |
3.3 kg (7.28 lb) |
03032AUQ | ||||||||||||||||||||
10GE interface card |
ET1D2X48SEC0 |
48-port 10GBASE-X interface card (EC, SFP+) |
EC |
S12704 chassis: supported in V200R008C00 and later versions S12708 and S12712 chassis: supported in V200R005C00 and later versions S12710 chassis: supported in V200R010C00 and later versions |
300 W |
3.42 kg (7.54 lb) |
03030SGC | ||||||||||||||||||||
10GE interface card |
ET1D2X48SX2S |
48-Port 10GBASE-X Interface Card (X2S, SFP+) |
X2S |
Supported in V200R010C00 and later versions |
258.1 W |
Routerbiz support most kinds of shipping method.By customer's shipping agent or express account:Customers can use your own shipping agent or express account(DHL Fedex, TNT, UPS…etc) 1. Pls arrange to pick up from our warehouse directly. 2. Routerbiz can delivery cargoes to appointed address locally, while shipping cost will be quoted to customer separately. Flexible shipping methods for your choice:
If you want to check shipping cost, pls contact with our sales representative:Email: Sales@routerbiz.comLivechat Skype: Whatsapp:+852 64897340 Routerbiz.com makes payment easy for your order, we accept Wire Transfer/Western Union/ Paypal/Credit Card/MoneyGram. Routerbiz.com guarantee customers' online security, every online transaction will been sent through high-secure server, it with 128-bit encrypted technology to make your account safe. Please visit Payment Methods for details. Livechat We also may require that you:1. Fill out the Card Authorization document and sign on the line indicated.2. Include a copy of your Identification document 3. Copy of the Credit Card (both sides) If Routerbiz determines an order to be a high risk order, Server Supply will only accept "Wire transfer" as a payment method. 1. 100% Quality Assurance:Guarrantee all items are ORIGINAL and GENUINE only.All new device past manufacture quality test; Used /Refurbished items have to past test with good condition before shipment. 2. Warranty TermsNew items with 1 year manufacture warranty since shipping date.Used/Refurbished items with 90 days warranty since shipping date. 3. After-sale ServiceBuild after-sale service department, consist of engineer & service representative.Provide professional & efficient service. 4. Free CCIE/Experts Technical SupportTechnical assistance on-line or by email Software download & network health checkRouterbiz will work together with you to solve problem till customers satisfied. This warranty covers manufacturing defects in materials and workmanship encountered in normal, reasonable use of the product during the warranty period. This warranty does not apply: > to abnormal wear and tear > if the product has been mistreated or mishandled > if the product has been improperly installed or configured > if the product has been subject to an accident > if the product has been subject to lightning, power surges or incorrect electrical voltage > if the product has been modified." |